Products – SIN HAI CHEONG (M) SDN BHD https://sinhaicheong.com.my PIPES & PIPE FITTINGS Mon, 23 Jun 2025 01:17:30 +0000 en-US hourly 1 https://sinhaicheong.com.my/wp-content/uploads/2023/03/SIN-Hai-Cheong_LG500x500-100x100.png Products – SIN HAI CHEONG (M) SDN BHD https://sinhaicheong.com.my 32 32 Pneumatic Actuator (HYDROSEAL CANADA) https://sinhaicheong.com.my/product/pneumatic-actuator-hydroseal-canada/ Mon, 23 Jun 2025 01:17:30 +0000 https://sinhaicheong.com.my/?post_type=product&p=3218 Electric Actuator (HYDROSEAL CANADA) https://sinhaicheong.com.my/product/electric-actuator-hydroseal-canada/ Mon, 23 Jun 2025 01:08:20 +0000 https://sinhaicheong.com.my/?post_type=product&p=3216 Online Process Turbidimeter https://sinhaicheong.com.my/product/online-process-turbidimeter/ Thu, 11 Jul 2024 06:34:33 +0000 https://sinhaicheong.com.my/?post_type=product&p=3105 Features • EPA and ISO compliant models • 0-10, 0-100, and 0-1000 NTU ranges • Customizable data logging • Simultaneous 4-20mA and Modbus signal outputs • Ultrasonic cleaning • USB port for downloading data and installing software updates • Two programmable high/low/ error alarms and an optional flow alarm]]> Features • EPA and ISO compliant models • 0-10, 0-100, and 0-1000 NTU ranges • Customizable data logging • Simultaneous 4-20mA and Modbus signal outputs • Ultrasonic cleaning • USB port for downloading data and installing software updates • Two programmable high/low/ error alarms and an optional flow alarm]]> UNISTRUCT SPRING NUTS https://sinhaicheong.com.my/product/unistruct-spring-nuts/ Wed, 27 Sep 2023 08:23:15 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2918 The spring nut is very often overlooked. When most people think of metal framing systems, they tend to only think about the Unistrut channel, Unistrut fittings, and pipe clamp. Despite that fact, Unistrut hardware is an integral part of the core functionality of the Unistrut system – especially spring nuts and channel nuts. There are two basic categories that channel nuts fall into: channel nuts without springs, and channel nuts with springs, or spring nuts. it’s a channel nut, with a spring on one side, that slides inside of a piece of strut channel. The spring takes up the extra space inside the channel, keeping the nut flush against the inturned edges of the channel, so you don't need an extra hand to hold it in place, while you're busy trying to affix parts and tighten them down. The spring length helps determine which channel profiles the spring nut can be used in, longer springs for deeper channels and shorter for shallow channel. Channel nuts, including spring nuts, typically have a threaded hole in the middle which is used to attach fittings to the strut. Unistrut nuts are available with a variety of hole sizes, to accept a range of hex head cap screw (hex bolt) sizes. There are even spring nuts with bolts built in; these are called stud nuts, and they can make the assembly process very quick and efficient.]]> The spring nut is very often overlooked. When most people think of metal framing systems, they tend to only think about the Unistrut channel, Unistrut fittings, and pipe clamp. Despite that fact, Unistrut hardware is an integral part of the core functionality of the Unistrut system – especially spring nuts and channel nuts. There are two basic categories that channel nuts fall into: channel nuts without springs, and channel nuts with springs, or spring nuts. it’s a channel nut, with a spring on one side, that slides inside of a piece of strut channel. The spring takes up the extra space inside the channel, keeping the nut flush against the inturned edges of the channel, so you don't need an extra hand to hold it in place, while you're busy trying to affix parts and tighten them down. The spring length helps determine which channel profiles the spring nut can be used in, longer springs for deeper channels and shorter for shallow channel. Channel nuts, including spring nuts, typically have a threaded hole in the middle which is used to attach fittings to the strut. Unistrut nuts are available with a variety of hole sizes, to accept a range of hex head cap screw (hex bolt) sizes. There are even spring nuts with bolts built in; these are called stud nuts, and they can make the assembly process very quick and efficient.]]> UNISTRUCT PIPE CLAMP https://sinhaicheong.com.my/product/unistruct-pipe-clamp/ Wed, 27 Sep 2023 08:08:00 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2914 Pipe Clamps firmly hold pipe and conduit in place when mounting it to Unistrut Channel. Pipe Clamps are available to accommodate a wide variety of pipe sizes (1/2” to 12”). Zinc plated and SS304 available.

]]> Pipe Clamps firmly hold pipe and conduit in place when mounting it to Unistrut Channel. Pipe Clamps are available to accommodate a wide variety of pipe sizes (1/2” to 12”). Zinc plated and SS304 available.

]]> THERMOPLASTIC WELDING MACHINE / HYDROAIR DIGITAL HOT AIR GUN (BRUSHLESS) https://sinhaicheong.com.my/product/thermoplastic-welding-machine_hydroair-digital-hot-air-gun-brushless/ Thu, 21 Sep 2023 06:57:48 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2898 HydroAir hot Air gun (Brushless) with a digital controller is a new style of manual hot air welding tool which on top of technology and has CE certificate. It comes with an aluminium box to prevent misplacement and also mishandling. This hot air gun is double insulation, constantly temperature controlled, and continuously adjustable.

The advantages of the brushless motor are mainly maintenance-free (no need to replace the brush), low noise and high speed, and a longer service life.

It is suitable for welding hot plastic materials like PVC, PP, PE, PVDF, etc.

  • Voltage: 230v
  • Power: 1600w
  • Frequency: 50/60Hz
  • Temperature: 20 - 620℃ adjustable
  • Air volume: Max 180L/Min
  • Air pressure: 4000Pa
  • Noise level: Less than 65 dB
]]> HydroAir hot Air gun (Brushless) with a digital controller is a new style of manual hot air welding tool which on top of technology and has CE certificate. It comes with an aluminium box to prevent misplacement and also mishandling. This hot air gun is double insulation, constantly temperature controlled, and continuously adjustable.

The advantages of the brushless motor are mainly maintenance-free (no need to replace the brush), low noise and high speed, and a longer service life.

It is suitable for welding hot plastic materials like PVC, PP, PE, PVDF, etc.

  • Voltage: 230v
  • Power: 1600w
  • Frequency: 50/60Hz
  • Temperature: 20 - 620℃ adjustable
  • Air volume: Max 180L/Min
  • Air pressure: 4000Pa
  • Noise level: Less than 65 dB
]]> CHAMFERING TOOL https://sinhaicheong.com.my/product/chamfering-tool/ Thu, 21 Sep 2023 06:51:48 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2896 Pipe chamfering tool for all standard plastic pipes diameter size SME1 OD 25mm up to OD 160mm and SME2 OD 40mm up to OD 315mm. The chamfering angle is 15°.

]]> Pipe chamfering tool for all standard plastic pipes diameter size SME1 OD 25mm up to OD 160mm and SME2 OD 40mm up to OD 315mm. The chamfering angle is 15°.

]]> PLASTIC PIPE CUTTER https://sinhaicheong.com.my/product/plastic-pipe-cutter/ Thu, 21 Sep 2023 06:43:22 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2890
  • Plastic pipe cutter model C63 (0 – 64mm), model C75 (0 – 76mm) and model C140 (50 - 140 mm).
  • Pipe cutters with cutter wheel and ratchet mechanism. A quick and accurate tool to use for cutting PE, PVC, PP, and PVDF pipes.
    • ]]>
  • Plastic pipe cutter model C63 (0 – 64mm), model C75 (0 – 76mm) and model C140 (50 - 140 mm).
  • Pipe cutters with cutter wheel and ratchet mechanism. A quick and accurate tool to use for cutting PE, PVC, PP, and PVDF pipes.
    • ]]>         ELECTRIC PIPE CUTTER https://sinhaicheong.com.my/product/electric-pipe-cutter/ Thu, 21 Sep 2023 06:39:37 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2888 This electric pipe cutter is a unique method for plastic pipe installations. You just need to cut once around a pipe end cut for connection.

    Pipe Ø (OD)

    75mm – 400mm

    Wall Thickness

    Plastic 12mm to 35mm.

    Applicable Material

    Plastic

    Voltage / Power

    230V / 1750W

    Speed

    2900 r/min

    Weight

    9.5 kg

    Packing Weight

    18 kg

    Packing size

    73 x 28 x 30 cm
    ]]>     This electric pipe cutter is a unique method for plastic pipe installations. You just need to cut once around a pipe end cut for connection.

    Pipe Ø (OD)

    75mm – 400mm

    Wall Thickness

    Plastic 12mm to 35mm.

    Applicable Material

    Plastic

    Voltage / Power

    230V / 1750W

    Speed

    2900 r/min

    Weight

    9.5 kg

    Packing Weight

    18 kg

    Packing size

    73 x 28 x 30 cm
    ]]>         UNISTRUCT CHANNEL https://sinhaicheong.com.my/product/unistruct-channel/ Thu, 21 Sep 2023 06:37:29 +0000 http://sinhai.aircompressormalaysia.com.my/?post_type=product&p=2884 Unistrut connections need no welding as the Unistrut nut or pipe clamp is designed to bite into the channel. Hence, even while applying normal pressure for installation, the Unistrut nut or pipe clamp locks on securely to the channel.

    Unistrut, with our continuous channel, eliminates the need for drilling. If you need to connect a frame to an existing one, simply bolt the Unistrut nut or pipe clamp to get a strong bond.

    As Unistrut parts are not drilled or welded, you can dismantle the parts (for example Unistrut nut or pipe clamp) and use them again. You reduce costs and avoid the issue of disposal of parts.

    If there is a change of plan or requirements after installation, simply loosen the Unistrut bolt or pipe clamp and relocate the channel nut or pipe clamp to the desired position. Unistrut channel gives you the flexibility to place the channel nut or pipe clamp anywhere along its slot.

    MATERIAL

    PART CODE

    DIMENSION

    TOCA PRE GALVANISED UNISTRUT CHANNEL

    SHF 2500 (G)

    41mm X 41m X 2.5mm X 6 meters

    SS304 UNISTRUT CHANNEL

    SHF 2500 (S4)

    40mm x 40mm x 2mm x 8 ft
    ]]>     Unistrut connections need no welding as the Unistrut nut or pipe clamp is designed to bite into the channel. Hence, even while applying normal pressure for installation, the Unistrut nut or pipe clamp locks on securely to the channel.

    Unistrut, with our continuous channel, eliminates the need for drilling. If you need to connect a frame to an existing one, simply bolt the Unistrut nut or pipe clamp to get a strong bond.

    As Unistrut parts are not drilled or welded, you can dismantle the parts (for example Unistrut nut or pipe clamp) and use them again. You reduce costs and avoid the issue of disposal of parts.

    If there is a change of plan or requirements after installation, simply loosen the Unistrut bolt or pipe clamp and relocate the channel nut or pipe clamp to the desired position. Unistrut channel gives you the flexibility to place the channel nut or pipe clamp anywhere along its slot.

    MATERIAL

    PART CODE

    DIMENSION

    TOCA PRE GALVANISED UNISTRUT CHANNEL

    SHF 2500 (G)

    41mm X 41m X 2.5mm X 6 meters

    SS304 UNISTRUT CHANNEL

    SHF 2500 (S4)

    40mm x 40mm x 2mm x 8 ft
    ]]>